4 Intel Desktop Board DP43BFL Specification Update
Specfication Update for the
Intel
®
Desktop Board DP43BFL
This document is an update to the specifications contained in the Intel
®
Desktop Board
DP43BFL Technical Product Specification (Order Number: E90027). It is intended for
hardware system manufacturers and software developers of applications, operating
systems, or tools. It will contain Specification Changes, Errata, Specification
Clarifications, and Documentation Changes.
For specification updates concerning the Intel processor that apply to this desktop
board, refer to the following:
• Intel
®
Core™2 Quad Processor Q9000 Series Specification Update (Order Number:
318727)
• Intel
®
Core™2 Quad Desktop Processor Q6600 Specification Update (Order
Number: 315593)
• Intel
®
Core™2 Duo Processor E8000 and E7000 Series Specification Update (Order
Number: 318733)
• Intel
®
Core™2 Duo Desktop Processor E6000Δ Sequence Specification Update
(Order Number: 313279)
• Intel
®
Pentium
®
Dual-Core Desktop Processor E2000Δ Sequence on 65nm Update
(Order Number: 316982)
• Intel
®
Celeron
®
Processor 400Δ Sequence on 65 nm Process Specification Update
(Order Number: 316964)
Unless otherwise noted in this document, it should be assumed that any processor
errata for a given stepping are applicable to the Altered Assembly (AA) revision(s)
associated with that stepping.
Refer to the Intel
®
4 Series Express Chipset Family Specification Update (Order
Number 319971) for specification updates concerning the 82P43 MCH Controller and
that may apply to the desktop board DP43BFL. Unless otherwise noted in this
document, it should be assumed that any MCH errata for a given stepping are
applicable to the Altered Assembly (AA) revision(s) associated with that stepping.
Refer to the Intel
®
I/O Controller Hub10 (ICH10) Family Specification Update (Order
Number 319974) for specification updates concerning the 82801JIB I/O Controller Hub
and that may apply to the desktop board DP43BFL. Unless otherwise noted in this
document, it should be assumed that any ICH10 errata for a given stepping are
applicable to the Altered Assembly (AA) revision(s) associated with that stepping.
To Next Page
Need help?
General
