Intel Desktop Board DP43BFL Specification Update 7
2. Updated Section 1.5 Memory to correct memory voltage.
1.5 System Memory
The board has four DIMM sockets and supports the following memory features:
• 1.5 V DDR3 800 MHz, DDR3 1066 MHz, and DDR3 1333 (OC) MHz SDRAM DIMMs
• Two independent memory channels with interleaved mode support
• Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMs with x16 organization are not supported.
• 8 GB maximum total system memory (with 2 Gb memory technology). Refer to
Section 2.1.1 on page 37 for information on the total amount of addressable
memory.
• Minimum total system memory: 512 MB
• Non-ECC DIMMs
• Serial Presence Detect
To Next Page
Loading...
