Intel NUC 10 Performance User Manual

User Guide for NUC10i7FNK, NUC10i5FNK, NUC10i3FNK
3
This guide tells you how to:
• Install and remove memory
• Install an M.2 SSD
• Install a VESA mount bracket
• Connect power
• Install an operating system
• Install the latest drivers
Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kits NUC10i7FNK, NUC10i5FNK and NUC10i3FNK have two 260-pin DDR4 SO-DIMM sockets.
Memory requirements:
• 1.2V low voltage memory
• 2666 MHz SO-DIMMs
• Non-ECC
Find compatible memory modules in the Intel Product Compatibility Tool
• NUC10i7FNK
• NUC10i5FNK
• NUC10i3FNK
NOTE
If you plan to install only one memory module, install it in the lower memory
socket.

Intel NUC 10 Performance Specifications

General

Brand	Intel
Model	NUC 10 Performance
Category	Desktop
Language	English