Intel NUC8i3BEH - Close the Intel NUC Chassis; Attach and Use VESA Bracket

User Guide for NUC8i7BEH, NUC8i5BEH, NUC8i3BEH
7
Close the Chassis
After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by
hand with a screwdriver to avoid over-tightening and possibly damaging the screws.
Attach and Use the VESA Bracket (Optional)
Follow these instructions to attach and use the VESA mount bracket:
1. Using the four small black screws that were included in the box, attach the VESA bracket to the
back of the monitor or TV.