To Next PageTo Next PageWhat to do if my Intel Motherboard shows “Invalid Configuration” or “CMOS Failure”?
If your Intel Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system's equipment. Ensure the correct information is in the setup.
What to do if my Intel P31 Motherboard doesn't boot from the hard disk drive?
If your Intel Motherboard system boots from the optical drive but not the hard disk, check the cable connecting the disk to the disk controller board. Ensure both ends are securely plugged in and verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important.
Why can't I boot my Intel Motherboard system after installing a second hard drive?
If you can't boot your system after installing a second hard drive on your Intel Motherboard, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, you may need to contact the drive manufacturer.
How to troubleshoot no power on Intel Motherboard?
If there is no power to your Intel Motherboard system, and the power light doesn't illuminate while the fan inside the power supply doesn't turn on, first ensure the power cable is securely plugged in. If it still doesn't work, try replacing the cable. If the issue persists, contact technical support.
What to do if Intel P31 Motherboard is inoperative but keyboard lights are on?
If your Intel Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drive is spinning, apply even pressure on both ends of the DIMM and press down firmly until the module snaps into place.
What to do if Intel P31 Motherboard doesn't boot from hard disk drive but boots from optical drive?
First, check the cable that runs from the disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important.
How to fix Intel Motherboard when it can not boot system after installing second hard drive?
Ensure that you set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturer.
Why Intel Motherboard shows “Invalid Configuration” or “CMOS Failure” message?
Review your system's equipment and ensure the correct information is in the setup.
General| Socket Type | LGA 775 |
|---|---|
| Memory Type | DDR2 |
| SATA | 4 x SATA 3Gb/s |
| SATA Ports | 4 |
| RAID Support | No |
| Integrated Graphics | No |
| Chipset | Intel P31 Express |
| Supported CPU | Intel Core 2 Duo, Core 2 Quad, Pentium Dual-Core, Celeron |
| Front Side Bus | 800/1066/1333 MHz |
| Memory Slots | 4 |
| Maximum Memory Supported | 8 GB |
| Expansion Slots | 1 x PCI-E x16, PCI-E x1, PCI |
| IDE | 1 x IDE |
| Memory Channels | Dual Channel |
| PCI Express Version | PCIe 1.1 |
| PCI Express Config | 1 x16 |
