10 Intel® PRO/1000 T IP Storage Adapter Quick Installation Guide
5. Select the package and click on the Install button at the bottom of the
screen.
Figure 6. Install Window Showing Selected RPM Package
6. After installation, you can view the files in the RPM package that were
installed by following this procedure:
a. View the Gnome RPM window
b. Expand the System folder
c. Open the SCSI subfolder
d. Highlight the installed RPM package icon
e.ClickontheQuerybuttonatthetopofthescreen
A pop-up screen (such as that shown within Figure 7) displays the
installed files as a result of that query.
QuickInstallGuide.fm Page 10 Tuesday, February 12, 2002 11:21 AM
To Next Page
Loading...
