Intel PRO/1000 T IP Storage - Basic Configuration Information

Intel® PRO/1000 T IP Storage Adapter Quick Installation Guide 13
Basic Configuration Information
iSCSI Configuration: Windows* 2000
Complete installation and configuration information is available on the
CD-ROM. Only initial configuration information is presented in this
document.
To begin configuring the PRO/1000 T IP Storage Adapter, go to the
Control Panel and double-click the "Intel
® PROSet for IP Storage" icon
(shown in Figure 8) to begin the configuration process.
Figure 8. Control Panel Showing the Intel® PROSet for IP Storage
Configuration Icon
The Intel PROSet for IP Storage Configuration screen will display in a
split-screen format (Figure 9).
The General folder screen shown in Figure 9 displays the 5 Property fields
(tabbed folders) for the selected storage component. The General folder
displays the following parameters:
• Component IP address
• Subnet Mask address
• Gateway address
• Ethernet address
• Connection speed
QuickInstallGuide.fm Page 13 Tuesday, February 12, 2002 11:21 AM