Intel X540-T2 User Manual

Intel X520 and X540-T2 Dual Port 10 GbE Adapters for IBM System x 5
Technical specifications
The Intel X520 Dual Port 10GbE Adapter and X520 Dual Port 10GbE SFP+ Embedded Adapter have the
following specifications:
Intel 82599 dual-port 10 Gb Ethernet controller

Two empty SFP+ cages for SFP+ transceivers or DAC cables

Supports 10 Gbps speeds with the optional SFP+ transceivers or DAC cables

Standard PCIe low-profile card form factor (X520 Dual Port 10GbE Adapter)

Mezzanine form factor (X520 Dual Port 10GbE SFP+ Embedded Adapter)

PCIe 2.0 x8 host interface

The Intel X540-T2 Dual Port 10GBaseT Adapter for IBM System x has the following specifications:
Intel X540 dual-port 10 Gb Ethernet controller

Two 10GBASE-T RJ-45 ports

Supports 100 Mbps, 1 Gbps, and 10 Gbps speeds

Standard PCIe low-profile card form factor

PCIe 2.0 x8 host interface

Standards supported
Both the Intel X520 and Intel X540-T2 adapters support the following IEEE standards:
IEEE 802.1p Class of Service (CoS) traffic prioritization

IEEE 802.1Q VLAN tagging

IEEE 802.3ad Link Aggregation Control Protocol

IEEE 802.3x Full-duplex flow control

The Intel X540-T2 adapter supports the following standards:
IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T copper twisted pair Gigabit Ethernet

IEEE 802.3an 10GBASE-T copper twisted pair 10 Gb Ethernet

The Intel X520 adapter supports the following standards:
IEEE 802.3ae 10GBASE-SR short range fiber optics 10 Gb Ethernet

10GSFP+Cu SFP+ Direct Attach copper


Intel X540-T2 Specifications

General

Brand	Intel
Model	X540-T2
Category	Adapter
Language	English