Intelbras AMT 8000 - Page 124

124
Interval between GPRS connections attempts
When a cellular modem (XAG 8000) connection with the Intelbras IP Receiver
software fails, the center tries to make a new connection with it. This function will
set the time between these attempts and leave the factory at zero (00 minutes).
This feature is mainly applied in installations that use prepaid plans and has the
purpose of reducing credit consumption in constant situations of connection failure,
unavailability of services by the operator or the Intelbras IP Receiver software (ex.:
ofine software ).
Note: if you want connection attempts to be established without a waiting time,
program the value 00 (ZERO).
To program, type:
829
+
Enter Enter
+
+
00 to 20 minutes
Interval
To edit/view the programmed value, type:
829
+
Enter Enter
+
After changing the congured value, press the Enter key. If you only want to view
the setting, press the Exit key and no programming will be changed.
6.17. Functions via SMS
The alarm center can send information messages via SMS to the mobile phones
programmed for activation, status reporting, among others.
The necessary settings and their variables are described below, it is not necessary
to congure GPRS (login, APN or password) of the chip to enable the SMS function.
Sending SMS messages
The alarm centre can send information messages via SMS to the programmed
mobile phones, as described below: