Need help?Do you have a question about the Intelbras AMT 2018 E and is the answer not in the manual?
Connects the main board to the power supply board for system operation.
Terminals for connecting wired sensors to detect events.
Procedures for resetting the alarm center to factory defaults or temporary states.
How to recover forgotten master or installer passwords via hardware reset.
Procedures for registering, changing, or deleting user and installer passwords.
Configures how different zones function (e.g., Timed, Panic, Smart).
Configuration for Ethernet, GPRS, 3G, IP monitoring, and DNS server settings.
Assigns specific operational modes and properties to each zone.
General| Remote Monitoring | Yes |
|---|---|
| Event Memory | 256 events |
| Power Supply | 12 VDC |
| Operating Temperature | -10°C to 50°C |
| Keypads Supported | 4 |
| Type | Wired |
| Zones | 8 wired (expandable to 64 with modules) |
To Next Page
