Intelbras AMT 2018 E - User Attributes Configuration

42
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 3 + ACTIVATE +
ZONE + ENTER
TYPE NAME + ENTER
Note:
» Type the Name for the Zones.
» NAME: Up to 14 characters.
ENTER + 4+ ACTIVATE +
ZONE + ENTER
TYPE NAME + ENTER
Note:
» Enter the Name for the Bus Devices.
» NAME: Up to 14 characters.
ENTER + 5 + ACTIVATE +
PANIC USER + ENTER
TYPE NAME + ENTER
Note:
» Type the Name for Wireless Panic Users.
» NAME: Up to 14 characters.
ENTER + 6 + ACTIVATE +
FIRE USER + ENTER
TYPE NAME + ENTER
Note:
» Type in the Name for the Wireless
Fire Users.
» NAME: Up to 14 characters.
User Attributes (AMT 2118 EG from version 1.20 and AMT 2018 E3G from 1.60)
Settings Result
Enable
Disable
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 2900 + USER
+ ENTER
1 + ENTER
Note:
» Permission in Partition A.
» USER: 01 to 60.
» Factory Default: Disabled.
ENTER + 2900 + USER
+ ENTER
2 + ENTER
Note:
» Permission in Partition A.
» USER: 01 to 60.
» Factory Default: Disabled.
ENTER + 2900 + USER
+ ENTER
3 + ENTER
Note:
» Not Available.
» USER: 01 to 60.
» Factory Default: Disabled.
ENTER + 2900 + USER
+ ENTER
4 + ENTER
Note:
» Not Available.
» USER: 01 to 60.
» Factory Default: Disabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 2900 + USER
+ ENTER
5 + ENTER
Note:
» Permission to Activate only.
» USER: 01 to 60.
» Factory Default: Disabled.
ENTER + 2900 + USER
+ ENTER
6 + ENTER
Note:
» Permission for Bypass only.
» USER: 01 to 60.
» Factory Default: Disabled.