Intelbras AMT 2018 E - Zone Attributes Configuration

43
Zone Attributes (AMT 2118 EG as of version 1.20 and AMT 2018 E3G as of version 1.60)
Settings Result
Enable
Disable
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 3900 + ZONE
+ ENTER
1 + ENTER
Note:
» Enables the Zones
» ZONE: 01 to 48.
» Factory Default: All Zones Enabled (except
Keyboard Zones).
ENTER + 3900 + ZONE
+ ENTER
2 + ENTER
Note:
» Permission in Partition A.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + 3900 + ZONE
+ ENTER
3 + ENTER
Note:
» Permission in Partition B.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 3901 +
ZONE + ENTER
1 + ENTER
Note:
» Smart Zone.
» ZONE: 01 to 24.
» Factory Default: Disabled.
ENTER + 3901 +
ZONE + ENTER
2 + ENTER
Note:
» Quick Zone.
» ZONE: 01 to 24.
» Factory Default: Disabled.
ENTER + 3901 +
ZONE + ENTER
3 + ENTER
Note:
» Quiet Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + 3901 +
ZONE + ENTER
4 + ENTER
Note:
» NO Zone.
» ZONE: 01 to 24.
» Factory Default: Disabled.
ENTER + 3901 + ZONE
+ ENTER
5 + ENTER
Note:
» Presence Announcer Zone (Chime).
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 3902 + ZONE
+ ENTER
1 + ENTER
Note:
» Timed Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + 3902 + ZONE
+ ENTER
2 + ENTER
Note:
» Follower Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + 3902 + ZONE
+ ENTER
3 + ENTER
Note:
» 24 Hour Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + 3902 + ZONE
+ ENTER
4 + ENTER
Note:
» Panic Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.