Intelbras AMT 2018 E - Page 44

44
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 3902 + ZONE
+ ENTER
5 + ENTER
Note:
» Medical Emergency Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.
ENTER + 3902 + ZONE
+ ENTER
6 + ENTER
Note:
» Fire Zone.
» ZONE: 01 to 48.
» Factory Default: Disabled.
Input On (only in AMT 2018 E3G)
Settings Result
ENTER + INSTALLER PASSWORD
Factory default: 9090
ENTER + 0099 +
ZONE + ENTER
Note:
» ZONE: 01 to 24.
» Factory Default: 00 - Disabled.
Partition of the Input On
Settings Result
Enable
Disable
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 516 + ENTER 5 + ENTER
Note:
» Permission in Partition A.
» Factory Default: Disabled.
ENTER + 516 + ENTER 6 + ENTER
Note:
» Permission in Partition B.
» Factory Default: Disabled.
Permission to Activate/Deactivate the Input On
Settings Result
Enable
Disable
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 518 + ENTER 2 + ENTER
Note:
» Permission to Activate.
» Factory Default: Disabled.
ENTER + 518 + ENTER 3 + ENTER
Note:
» Permission to Deactivate.
» Factory Default: Disabled.
PGM1 Remote Control Registration
Settings Result
Register
ENTER + INSTALLER
PASSWORD
Factory default:
9090
ENTER + 66 + 1 + ENTER
Control Key
actuation
Note:
» Registered Control = 3 short beeps.
» Control Not Registered = 1 long beep.
Delete
ENTER + INSTALLER
PASSWORD
Factory default:
9090
ENTER + 76 + 1 + ENTER
Note:
» Deletes all controls registered to PGM 1.