Intelbras AMT 8000 - Page 145

145
P = permission setting, 5 active only and 6 bypass permission.
GS = group of passwords from 0 to 9, with group 0 going from 01 to 10, group
1 from 11 to 20 and so on, closing with group 9 from 91 to 97.
» Setting permission for Partial mode (stay)
Enter + 221 + GS + Enter + Select password + Enter
GS = group of passwords from 0 to 9, with group 0 going from 01 to 10, group
1 from 11 to 20 and so on, closing with group 9 from 91 to 97.
Zone congurations
» Enable/Disable zones
Enter + 30 + G + Enter
G = Zones group from 0 to 6.
After inserting the command, use the keyboard to enable/disable the corresponding
zones for the group and press the Enter key to conrm.
» Enable Partial mode (stay)
Enter + 02 + G + Enter
G = Zones group from 0 to 6.
After inserting the command, use the keyboard , to enable/disable the corresponding
zones for the group and press the Enter key to conrm. Passwords must also have
permission for Partial mode (stay).
» Zone Functions
Enter + 3 + F + G + Enter
F= functions of zones from 1 to 6.
G = Zones group from 0 to 6.
After inserting the command, use the keyboard , to enable/disable the corresponding
zones for the group and press the Enter key to conrm.
Zone Functions
1 Timed
2 Follower
3 24 Hour
4 Panic
5 Medical emergency
6 Fire