Intelbras AMT 8000 - Page 15

15
» Text message display.
» Display of the battery level of the alarm center.
» Display of zone status (open/closed).
» Signs the status of the partitions.
» Panic, Medical Emergency and Fire function.
» Violation protection (tamper).
» Sound signalling during operation.
» DC Power:4 batteries 3 Vdc (CR2450) included.
» Communication supervision and encrypted transmission.
» Range: up to 600 m with direct view in open eld.
The following gure shows the illustrative image of the keyboard:
1 2 3
4 5 6
7 8
0
9
XAT 8000 Wireless Keyboard
The keyboard has two tamper keys, one of which is located on the front of the
keyboard, under the cover, is activated by moving the keyboard cover, its function
is to activate the keyboard and the other key, located on the back of the keyboard
cabinet is functioning as tamper (violation protection). On the front of the XAT
8000 there is the light conductor for the brightness sensor, which has the function
of controlling the intensity of the display and keyboard for battery optimization.
The keyboard can be installed on different surfaces, always placing it in the
vertical position in relation to the oor and using double-sided tape or screws (not
included) to x the base and after attaching the device, tting and checking that it
was placed correctly so that there are no falls and damage.