Care and Security
» Follow all instructions in the manual for product installation and handling.
» Perform the installation in environments not susceptible to factors such as rain,
fog and splashes of water.
» Wireless communication technology, when exposed to environments with high
power radiation, may suffer interference and have its performance impaired.
Example: places near TV towers, AM/FM radio stations, amateur radio stations, etc.
» Do not install the alarm center facing air conditioning or heating equipment.
» Do not expose directly to sunlight.
» Clean only the external part of the device, using only a damp cloth (do not use
chemical solvents).
» Do not subject the device to excessive pressure or knocks/falls.
» Do not cover the device with adhesives, paper or inks.
» Check that at the installation site, the LED indicating the devices ash green when
activated.
» Avoid installation on metal surfaces in order not to attenuate the transmission
signal between the devices in the system.
» The installation, conguration of the center and the other products that make up
this system must be performed by a qualied professional.
» Perform periodic tests on it in order to validate weather conditions, battery level
and other factors, so that the site supervised by the system is always able to
operate correctly.
To Next Page
Loading...
