Intellian t110W - Page 116

t110W/t130W – Marine Satellite Television System
116
WARNING: Tick the checkbox before modifying the settings. After conguration, click
'set...' button to submit the settings.
12
Parameter Setting
- Initial Sat Count: Set the threshold count for maintaining
tracking.
- WRS Detect Level: Set the WRS detection level.
- Voltage Threshold: Set the voltage threshold. The voltage
threshold is to distinguish the voltage between 13 V and
18V.
- DiSEqC Threshold: Set the DiSEqC threshold.
The DiSEqC threshold is to distinguish the 0KHz tone
and 22 KHz tone.
- Sat Verify Time: Set the threshold count for the satellite
verication.
- Tracking Stable Count: Set the threshold count for
stabilizing the satellite before tracking.
- Offset Diff AZ-EL: Set the offset difference between
Azimuth and Elevation range.
- Search Lock Count: Set the threshold count for locking
on the satellite before tracking.
- Offset Diff RH-LH: Set the offset difference between
RHCP and LHCP signals.