t110W/t130W/t110Q/t130Q – Marine Satellite Television System
26
Mounting the Radome
Bolt the radome base directly to the support pedestal. Make sure to use the Intel-
lian supplied bolts from the accessory box when you mount the radome.
Preparing Antenna Supporting Pole
WARNING: Ensure that cables have been run through watertight ttings to prevent
water entry into the vessel when installation is completed.
Mounting Plate
Min. 1cm(0.4”)
Max. 3cm(15”)
Support Pedestal
Appr. Ø25.4cm(10”)
Min 60cm(24”)
Max 150cm(60”)
To Next Page
Loading...
