Intellian t130Q - Mounting the ACU

t110W/t130W/t110Q/t130Q – Marine Satellite Television System
32
Mounting the ACU
NOTE: Ensure that the cable's length is installed long enough in order to pull out the
ACU from the rack.
Intellian supplies two types of mounting methods (a)19” Rack Mount Type and (b)
Table Mount Type to mount your ACU.
Figure 01. 19" Rack Mount Type
Figure 02. Table Mount Type
Rack Mount Type
- The ACU should be installed using the two supplied Rack Mounting Brackets
which allow for a side 19” rack mounting conguration.
- Using the Flat Head screws supplied, attach the mounting brackets to the sides
of the ACU.
- Place the ACU in the location where it is going to be installed.
- Connect the cables to the rear of the ACU.
Table Mount Type
- The ACU should be installed using the two supplied Table Mounting Brackets
which allow for a top or bottom mounting conguration.
- Using the Sems Bolts supplied, attach the mounting brackets to the sides of the
ACU.
- Place the ACU in the location where it is going to be installed.
- Using a pencil to mark the 4 hole positions (2 each side), and use the appropriate
drill bit to screw down the brackets.
- Connect the cables to the rear of the ACU.