Cells replacement (for watch):
Unscrewed the back cover, there are 2pcs cell. One is CR2032 cell for Bluetooth operation,
another one is SR626SW cell for watch movement. If the analog hands move slowly or cannot
move, please replace to 1pc new SR626SW cell (or equivalent size cell). If the LED is dim or no
flash, please replace to 1pc CR2032 cell (or equivalent size cell). Below you will find the flow of
cells replacement. To avoid the watch damage, please ask for a technical man to replace the cells.
CR2032 cell white sticker SR626SW cell
Unscrew the back case as Fig
A CR2032 cell cover with white sticker is on the top
Take out the CR2032 cell by tweezers
A smaller SR626SW cell is at the bottom
Caution: replace a new CR2032 cell is also need the sticker as insulation.
To Next Page
Loading...