Go to Settings
Click "stop sensor" to finish monitoring.
Note: After the sensor is ended
，
the App will not
receive BG readings and Alarm/Alert.
Take off adhesive pad.
Note: Remove sensor and transmitter together.
Take out transmitter with the releaser.
Put the transmitter back to package, if not using.
Note:
Transmitter can store data up to 14 days, and it will
erase all data once it is removed from the sensor.
Take out the transmitter, after you remove transmitter
and sensor together from your body.
Warning
In rare cases, the sensor electrode may fracture. Don't ignore it. If the sensor
electrode breaks and there is no visible sensor electrode on the skin, do not attempt
to remove it yourself. Seek professional medical help in case of infection symptoms
or inflammation - redness, swelling or pain. If the sensor electrode ruptures, please
report to our technical support.
No safety hazard was found in the patient's residual rupture sensor electrode during
in vitro NMR test. There was no obvious migration or heating of the sensor
electrode, and the imaging was limited to the area around the sensor electrode.
To Next Page
Loading...