INTELLIGO IGF 2.1 - Function Bar

25
5.1.3 CGM Status
CGM Status
Click “CGM” icon in homepage to enter CGM status, which is showing:
CGM Status:
RUNNING，DISCONNECTED，NO_SENSOR，
CALIBRATION_DONE，
CALIBRATION_RECOMMENDED
Transmitter ID
Transmitter SN
Sensor ID
Sensor LOT number
Sensor Started
When this sensor session starts
Last Calibration
The latest calibration
Replace Sensor
When this sensor session ends, and the sensor shall be
replaced
5.1.4 Events
You can add Events (carbs, insulin, Medication, sport) by pressing on the home
screen and the events will be recorded in Log.
5.2 Function Bar