INTELLIGO IGF 2.1 - Page 5

3
Sensor
The continuous glucose monitoring sensor is a product in a sterile sealed pouch. The
sensor is mainly made up of an applicator, a sensor base and a sensor electrode. An
adhesive pad is attached to the sensor base. Insert the sensor electrode into the
subcutaneous tissue of the abdomen and remove the applicator. The sensor base is
attached to the skin for up to 14 days of monitoring. Please dispose of the sensor,
according to your local regulations for medical waste, after the sensor session is
finished,
The performance parameters of sensor
Model No.
IG2-SR-1P
Measurement range
2.2-22.2 mmol/L
Effective working time
14 days
Calibration method
Glucose Meter
Calibration range
2.2-22.2 mmol/L
Storage conditions
Temperature:2
o
C-25
o
C;
Relative humidity:15%-85%
Transport conditions
Room temperature for transportation
Rated voltage
d.c. 3V
Working conditions（After
the transmitter placed in the
sensor base）
Temperature：10
o
C-40
o
C；
Relative humidity：10%-95%
Battery lifetime
No less than 14 days
Sterilization method
Irradiation sterilization