Need help?Do you have a question about the Intellijel Quadrax and is the answer not in the manual?
Guide to physically installing the module into a Eurorack case.
Instructions for connecting the Qx expander module.
Detailed explanation of each knob and button on the Quadrax front panel.
Description of the module's input and output jacks.
Configuring a channel as an Attack/Decay envelope.
Configuring a channel as an Attack/Hold/Release envelope.
Configuring a channel as a cycling AD envelope (unipolar LFO).
Configuring a channel to generate bursts of pulses.
Configuring a channel as a bipolar LFO.
Description of independent channel operation.
Linking channels to trigger sequentially via TRIG input.
Linking channels triggered by previous channel's EOR.
Linking channels triggered by previous channel's EOF.
Combining trigger sources for channel activation.
Detailed explanation of STANDARD LFO operation.
Detailed explanation of ALTERNATE LFO operation.
Example of synchronizing multiple LFOs with a single clock.
Chart showing FALL (MORPH) and SHAPE knob interactions for LFO.
How to enter and exit the CV assignment interface.
Assigning CV inputs to destinations and setting attenuversion.
Procedure to clear CV assignments for one channel.
Procedure to clear all CV assignments across all channels.
EOR/EOF behavior in AD mode.
EOR/EOF behavior in AHR mode.
EOR/EOF behavior in CYCLE mode.
EOR/EOF behavior in BURST mode.
EOR/EOF behavior in LFO mode (Standard/Alternate).
General| Brand | Intellijel |
|---|---|
| Model | Quadrax |
| Category | Portable Generator |
| Language | English |
To Next Page