NVS30 Network Video Server
Model
550994
Auto-Setup
No need to worry about complex network setup procedures. The installation wizard provides an easy
setup that allows a non-technical person to begin using the camera right away.
SSL Encryption
Secure network connections using data encryption between the camera and the network client for
additional data security.
Dual Mode: Simultaneous MPEG4 + Motion-JPEG Streaming
The NVS30 Network Video Server supports MPEG4 as well as Motion-JPEG video formats, providing
superior quality and, at the same time, continuing to support existing applications. MPEG4, on the other
hand, allows you to transmit a larger amount of data over the same amount of bandwidth while providing
smooth and seamless viewing.
Bi-Directional Audio Support
Attaching a microphone and loudspeakers to the NVS30 Network Video Server will allow you to listen and
talk using the two-way audio support. On top of that, the camera is equipped with an internal microphone. This
is ideal for most security and surveillance applications.
Integrated DDNS Client
Utilize the free DYNDNS service (like DYNDNS.org) in order to connect to your camera, even if you do not
have a static IP address assigned by your ISP (Internet service provider). This feature lets you easily set up a URL
that can be used to access the camera through the Internet using any Web browser.
Unique Windows Live Messenger Support
Set up a free MSN / Hotmail account for the network camera and connect to it via Windows Live Messenger as
if it were a regular contact in your buddy list. Remote access cannot be any easier.
Power over Ethernet
The NVS30 Network Video Server supports the 802.3af standard, allowing it to be installed in locations
where an AC power source is not readily available. Simply plug the camera into a PoE-compliant switch and
begin transmitting power as well as data over the Cat5e or Cat6 network cabling.
To Next Page
Loading...
Need help?
General
