Why Intellitec XB410 Motorized Toy Car does not move?
If your Intellitec Motorized Toy Car isn't moving, make sure that the radio is turned on and the receiver is active. Check that the battery is properly plugged in and charged.
What to do if Intellitec XB410 does not follow driving input?
If your Intellitec Motorized Toy Car isn't responding to your driving commands, ensure that both the radio and receiver are turned on. Also, verify that the reverse switches are correctly set. Check the Dual Rate switches, and replace weak batteries in both the model and the radio, charging the main battery as well.
General| Brand | Intellitec |
|---|---|
| Model | XB410 |
| Category | Motorized Toy Car |
| Language | English |
General advice, charging, pre/post-drive checks, and startup procedures.
Step-by-step instructions for powering on the model and transmitter.
How to pair the transmitter and receiver.
Solutions for common radio control issues.
Information on the 45A ESC, including calibration.
How to adjust ESC settings using the program card.
To Next Page