7. Interface
7.1. RJ45 WAN Port
Bonding this port to another router/switch to connect Memory 2 Move with the internet
7.2. Micro USB 3.0 Interface
The built-in Micro USB 3.0 is for faster data transfer and charging the internal battery when
connected directly into the computer’s USB port or wall chargers. This works only by Power
ON mode
7.3. LED Panel
Power LED:
LED Off: The device is switched-off
Green Color:
On: Battery is fully charged
Slowly Blinking: Battery charging
Blinking Fast: Device Shutting-Down
Red Color:
Steady Light: Less than 30% available power
Blinking Fast: Will soon shut-down, must be charged immediately
HDD LED:
LED Off: The device is switched-off or HDD is asleep
White LED:
Steady Light: Ready to use
Connected into USB 2.0 Port
Blinking: Read/Write activities
Blue LED:
Steady Light: Ready to use
Connected into USB 3.0 Port
Blinking: Read/Write activities
Wi-Fi LED:
Blue Color:
Blinking: Starts the Initialization process
Steady Light: Initialization process completed
Ready to use
LED Off: The device is switched-off
Internet LED:
Blue Color: internet connection is ok
No LED: No connection established
To Next Page
Loading...
