What to do if my Intenza 550 Te2 Treadmill shows OVERLOAD?
If your Intenza Treadmill displays 'OVERLOAD', first check the running belt and deck condition. If the problem persists, consider changing the inverter.
How to fix CHECK SAFETY KEY error on Intenza 550 Te2?
If the Intenza Treadmill displays 'CHECK SAFETY KEY', first ensure the safety key is properly inserted. Then, inspect the cable connected to the safety key.
Why does my Intenza Treadmill show PFC Code 90?
If your Intenza Treadmill shows a 'PFC' error with code 90, inspect the running belt and deck condition.
Why does my Intenza 550 Te2 Treadmill show PFC Code 91?
If your Intenza Treadmill shows a 'PFC' error with code 91, inspect the running belt and deck condition.
What to do if Intenza 550 Te2 displays USB STICK FAIL?
If your Intenza Treadmill displays 'USB STICK FAIL', check the connection of the USB stick to the USB board, and also inspect the cable that connects the USB board to the console.
How to troubleshoot CHECK IVT OR CABLE error on Intenza 550 Te2 Treadmill?
If your Intenza Treadmill displays 'CHECK IVT OR CABLE', start by checking the cable that runs from the display to the inverter. If the issue continues, replace the PSB, and if needed, replace the inverter.
How to fix CHECK USB COMM error on Intenza 550 Te2?
If your Intenza Treadmill displays 'CHECK USB COMM', replace the console main board.
General| Motor Power | 3.0 HP |
|---|---|
| Programs | Fitness Tests, Quick Start, Manual, Constant HRC, Interval, Custom, Goal |
| Speed Range | 0.8 - 20 km/h |
| Incline Range | -3 - 15 % |
| Display | 15 inch |
| Maximum User Weight | 181 kg |
| Weight | 175 kg |
| Running Area | 60 x 22 in (152 x 56 cm) |
To Next Page
