How to troubleshoot 'NEED MAINTENANCE' on Intenza Elliptical Trainer?
If your Intenza Elliptical Trainer displays 'NEED MAINTENANCE', execute the Self Diagnosis function to check the error code. Then, refer to the service manual for troubleshooting steps.
What to do if Intenza 550ETe2 Elliptical Trainer shows 'CHECK INC OR CABLE'?
If the Intenza Elliptical Trainer displays 'CHECK INC OR CABLE', check the buzzer sound from the incline board. If the beep sound lasts for 3 seconds, check the cable connection from the console to the incline board. However, if the beep sound lasts for 1 second, replace the incline board.
What to do if Intenza Elliptical Trainer displays 'CHECK LCB OR CABLE'?
If your Intenza Elliptical Trainer displays 'CHECK LCB OR CABLE', check the buzzer sound from the LCB. If the beep sound lasts for 3 seconds, check the cable connection from the incline board to the LCB. If the beep sound is 1 second long, replace the LCB.
What to do if Intenza 550ETe2 says 'USB STICK FAIL'?
If your Intenza Elliptical Trainer shows 'USB STICK FAIL', check the USB stick connection to the USB board or the cable running from the USB board to the console.
What to do if Intenza Elliptical Trainer displays 'CHECK PEDAL SENSOR'?
If your Intenza Elliptical Trainer displays 'CHECK PEDAL SENSOR', replace the SPM sensor, or check the cable connection of the SPM sensor.
What to do if Intenza 550ETe2 displays 'NO BATTERY'?
If your Intenza Elliptical Trainer displays 'NO BATTERY', check the battery connection, including the cable and connector.
What does 'CHARGE THE BATTERY' mean on Intenza 550ETe2?
If your Intenza Elliptical Trainer displays 'CHARGE THE BATTERY', you need to charge the battery.
What to do if Intenza 550ETe2 shows 'CHECK MEMORY'?
If the Intenza Elliptical Trainer displays 'CHECK MEMORY', replace the console main board.
What to do if Intenza 550ETe2 shows 'CHECK USB COMM'?
If your Intenza Elliptical Trainer displays 'CHECK USB COMM', replace the console main board.
What to do if Intenza Elliptical Trainer displays 'CHECK CONSOLE PCB'?
If your Intenza Elliptical Trainer displays 'CHECK CONSOLE PCB', replace the console main board.
General| Brand | Intenza |
|---|---|
| Model | 550ETe2 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page
