EasyManua.ls Logo

Inter-fab The city 2 slide User Manual

Default Icon
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rev. 7/15 (SBK-CITY2 INSTL)
INTER-FAB, INC. 3 0 5 0 S. A LVERN O N WAY TUCS O N , A Z 8 5 7 1 3
520.7 9 0 . 7 0 4 0 800.7 3 7 . 5 3 8 6 FA X 520.790.7127 inter -fa b . c o m
T H E C I T Y 2 S L I D E
Assembly & Installation Instructions
WARNING: IMPORTANT INSTALLATION INFORMATION
The installation of this product should be done only by a licensed and professional installer. Installation should
be done strictly in conformance with all local building codes, electrical codes and other building and safety laws
and regulations. Among other things, that your installer should carefully analyze the need to bond the product
to prevent an electrical hazard. Failure to properly install this product could result in a dangerous condition,
including but not limited to electrical or structural hazards. Inter-Fab, Inc. disclaims all liability arising from the
installation and the user assumes all risk associated with the installation.
IMPORTANT
These
instructions
must remain
with the
slide owner!
Visit inter-fab.com to view our installation help video.
(Video does NOT replace installation instructions.)
Question and Answer IconNeed help?

Do you have a question about the Inter-fab The city 2 slide and is the answer not in the manual?

Inter-fab The city 2 slide Specifications

General IconGeneral
BrandInter-fab
ModelThe city 2 slide
CategoryPlay Sets & Playground Equipment
LanguageEnglish

Summary

WARNING: IMPORTANT INSTALLATION INFORMATION

INTENDED USE INSTRUCTIONS

WATER SAFETY ENVELOPE

SLIDE FOOTPRINT DIAGRAMS

Diagram D - Right Turn Slide

Provides dimensions and layout for the right turn slide placement.

Diagram E - Left Turn Slide

Provides dimensions and layout for the left turn slide placement.

SLIDE & WATER STUB-UP PLACEMENT DIAGRAMS

Diagram F - City 2 Slide - Left Turn

Illustrates water stub-up location for the left turn slide.

STEP ONE: FLUME ASSEMBLY

STEP TWO: HANDRAIL PRE-ASSEMBLY PROCEDURE

STEP THREE: SLIDE ASSEMBLY PROCEDURE

ELECTRICAL BONDING

STEP FOUR (A): INSTALLING SLIDE PRIOR TO POURING DECK

STEP FOUR (B): INSTALLING SLIDE USING DECK FLANGES

STEP FIVE: CONNECTING THE WATER SUPPLY

FINAL INSPECTION CHECK LIST

Related product manuals