Inter-lux WG-SM20LDL User Manual

11
16
"
5
8
"
5
8
"
5
8
"
Adjustable Bracket Mounting
18090
1
1
4
"
1
1
2
"
DRAWING NOT TO SCALE
940-SM20LDL
Remote Driver Box (A) Luminaire (B)
Joiner (C)
Endcap (D)
Screw
Clip (E)
Grid
Clip (F)
Magnet (G)
Drill
Wire Strippers
Wire
Connectors
M1.5 & M2
Allen Key
Phillips #2
Screwdriver
Grid Mounting
Hard Surface Mounting Magnet Mounting
Bracket (H)
INSTALLATION INSTRUCTIONS
Whitegoods 20 Linear Surface
Mounting Dimensions Isometric View
Photo Rendering
Package Includes: Items needed (supplied by others)
410-381-1497 inter-lux.com
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
Inter-lux . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF Inter-lux IS PROHIBITED.
PAGE 1 OF 5
*Inter-lux reserves the right to make changes to this product and related installation instructions at any time without prior notice.
WG-SM20LDL
CAUTION: CAUTION:
THIS IS AN ELECTRONIC DEVICE. CARE MUST BE TAKEN INTER-LUX IS NOT RESPONSIBLE FOR THE
DURING STORAGE AND HANDLING. STORE IN A CLEAN, COOL STRUCTURAL INTEGRITY OF THE BUILDING TO
AND DRY LOCATION. ELECTROSTATIC DISCHARGE (ESD) CAN SUPPORT THE LUMINAIRE. ADDITIONAL BACKING
HARM THIS PRODUCT. AVOID STATIC DISCHARGE WHILE MAY BE REQUIRED.
HANDLING THIS PRODUCT.
WARNING: WARNING: WARNING:
INSTALL PRODUCT IN ACCORDANCE FAILURE TO COMPLY WITH THE READ ALL SAFETY INSTRUCTIONS
WITH LOCAL AND NATIONAL ELECTRICAL INSTALLATION INSTRUCTIONS MAY INCLUDED WITH LUMINAIRE BEFORE
CODES BY A QUALIFIED ELECTRICIAN. RESULT IN DEATH OR SERIOUS INJURY. INSTALLING LUMINAIRE. SAVE
INSTRUCTIONS FOR FUTURE USE.

Inter-lux WG-SM20LDL Specifications

General

Brand	Inter-lux
Model	WG-SM20LDL
Category	Lighting Equipment
Language	English

Summary

Mounting Dimensions

Hard Surface Mounting

Details for installing the luminaire on a hard, non-magnetic surface using clips.

Magnet Mounting

Details for installing the luminaire on a ferrous surface using magnetic mounts.

Grid Mounting

Instructions for mounting the luminaire to a standard grid ceiling.

Adjustable Bracket Mounting

Information for installing the luminaire using adjustable mounting brackets.

Installation of Mounting Hardware

Screw Clip Mounting

Fasten provided clips evenly spaced to the intended mounting surface.

Magnetic Surface Mounting

Fasten provided magnets evenly spaced to the luminaire's backside.

Grid Ceiling Mounting

Push grid clips onto the grid at an angle and twist to lock.

Mounting with Bracket

Bend brackets 90 degrees and screw them onto the mounting surface.

Installation of Luminaire and Testing

Installation of Luminaire on Hard Surface

Connect low voltage cables and press luminaire onto screw clips.

Installation of Luminaire on Ferrous surface

Connect low voltage cables and attach magnets to surface.

Installation of Luminaire on Grid Ceiling

Connect low voltage cables and press luminaire onto grid clips.

Installation of Luminaire on Adjustable Bracket

Connect low voltage cables and press luminaire onto bracket clips.

Driver Wiring Diagrams

Standard Non-Dimming/DFPN Dimming

Wiring diagram for standard non-dimming or DFPN dimming configurations.

D3W 1% 3-Wire Dimming

Wiring diagram for D3W 1% 3-wire dimming control.

L3DAE 1%/L3D0E 0.1% Dimming

Wiring diagram for L3DAE 1% or L3D0E 0.1% dimming control.

0-10V Dimming

Wiring diagram for 0-10V dimming control.