EMERGENCY PANEL
6
EP-6216
9. TIMER INPUT JACK
This jack is for the connection of an external timer, such as the Inter-M PW-6242A.
10. AUTO ANN INPUT JACK
Connect the output of an auto broadcasting system (or a cassette deck or other line level device) to this
balanced XLR input jack. This input is active when the AUTO ANN SELECTOR SWITCH (5) is set to external.
11. PRE OUT JACK
This balanced XLR jack carries the pre-amp out signal, and is used to make a mono connection to the main
amplifier and speakers.
To Next Page
Loading...
