22
FEATURES
• HIGH POWER AND HIGH FIDELITY
The designed sound level can be obtained without using the full power output. To insure stability and fidelity
against various protection circuitry is provided.
• DUAL POWER
P series amplifier has to be separated power. If one channel is break down, this amplifier can be perform well
by another channel.
• VARIOUS DISPLAY
To confirm the operating status, LED displays of TEMP-PROT, CLIP-LIM, SIGNAL and POWER are provided
of front panel.
• INPUT PARALLEL AND BRIDGED MONO FUNCTION
These stereo amplifiers can be used for bridged mono and input parallel function by selecting the mode
switch.
• HIGH EFFICIENCY OUTPUT CIRCUIT
To perform of high efficiency, these amplifier be used to 2 or 3 step output circuit. (3 step-P3200, 2 step-
P2000)
• VARIOUS PROTECTION CIRCUIT
To insure stability and reliability against over current, overheating, output short, DC fault detection, clip-limiter,
output fuse and RF protection circuitry is provided.
• FAN COOLING METHOD
These amplifier has continuously variable speed fan and air flow is front-to-rear.
• COMBINATION INPUT JACK AND LINK OUT
For the convenient use of this system, combination input jacks and XLR output jacks are provided for each
channels.
To Next Page
Loading...
