Need help?Do you have a question about the Inter-m P-3200 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz ~ 20kHz ±1dB |
| Input Impedance | 20kΩ (balanced), 10kΩ (unbalanced) |
| Impedance | 4Ω, 8Ω |
| Dimensions | 482(W) x 88(H) x 380(D) mm |
| Cooling | Fan |
| Protection | Overload, Short Circuit, Thermal |
| Connectors | XLR input |
Important warnings and cautions regarding electric shock, rain, moisture, and proper plug usage to ensure safe operation.
Details the power switch and indicators for turning the unit on and off.
Explains controls for adjusting input levels and LEDs showing output levels and clipping.
Describes indicators for clipping, limiting, and various protection circuits (thermal, short, DC fault).
Instructions for connecting the AC input cord to the AC outlet.
Details on balanced combination jacks for input and XLR jacks for link, including wiring.
Describes the switch for selecting stereo, input parallel, and bridged mono functions.
Details on using binding posts for speaker connections in stereo and bridged mono modes.
Explains the use of Speakon connectors for stereo and bridged mono speaker outputs.
Explains independent operation of channels A and B with a minimum 4Ω impedance per channel.
Describes bridging channels A and B for mono operation, with a minimum 8Ω impedance.
Guidelines for connecting speaker cables, including wire stripping, terminal tightening, and chassis contact prevention.
Recommendations for ensuring proper air flow for cooling, especially when rack-mounted.
To Next Page
