PUBLIC ADDRESS POWER AMPLIFIER
3
PA-9312/9324A/9336/9348
Features
Features
- HIGH POWER, LOW DISTORTION
- 120W (PA-9312), 240W (PA-9324A) or 360W (PA-9336) of RMS power, with less than 1% THD.
- 480W(PA-9348) of RMS power, with less than 5% THD.
- BALANCED INPUT
Balanced XLR inputs to reduce ground hum and increase efficiency.
- GAIN ADJUSTMENT
Input gain is adjustable from –12dB to 0dB (1V) via rear panel control.
- EMERGENCY BATTERY BACKUP
Emergency battery backup for unexpected AC power failure.
- SLIM DESIGN, COMPACT SIZE
Streamlined design fits in a compact 3RU space.
Accessories
One detachable AC power cord and XLR cord are provided for use with this product.
Operation
Operation
Make certain that speakers and input sources are properly connected before switching on.
Keep volume levels turned down before switching on.
NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This
is due to the built-in protection circuitry, designed to protect speakers and other system components.
To Next Page
Loading...
