Item No. 8105081 – 12/2013 Page 1 of 3
Quick Guide - Basic Tone Audiometry
The purpose of this document is to provide a quick guide for basic functions of the AC440 Audiometry modules
for the Affinity
2
/Equinox
2
and Callisto™ suites. This Quick Guide will focus on Tone Audiometry as well as a
basic introduction to the various icons, tools and menus available.
Starting up the AC440 Module
1. Launch the Affinity
2
/Callisto™ Suite from Noah or OtoAccess™.
2. Click on the AUD tab on the upper right hand side of the screen.
3. Click on the icon to launch the tone audiometry screen, if Tone audiometry is not the default
screen.
4. Select the desired Audiometry protocol from the “Protocols and Sessions” drop down list.
Conducting Tone Audiometry
1. Choose the transducer type.
2. Choose the Stimulus type.
To Next Page
Loading...
