Item No. 8105081 – 12/2013 Page 2 of 3
3. Choose the test frequency :
PC Keyboard: right/left arrow keys.
Mouse mode: Left/Right arrow buttons.
4. Choose the intensity:
With PC keyboard: use the up/down arrow keys.
Mouse mode: Up/Down arrow buttons.
5. Presenting the stimuli
PC Keyboard: press on the space bar or left Ctrl button.
Mouse mode: hover the mouse over the Stimuli button.
6. If masking is necessary:
Turn on masking in Channel 2 by ensuring that the desired transducer is
selected for non-test ear.
Ensure that the word “Masking” is highlighted in orange.
Choose “Rev” to present the masking noise
continuously.
It is also possible to turn on Automasking or Masking
help
To Next Page
Loading...
