1. Menu: Click on Menu to access other Audiometry Special
tests by going to Menu│Tests.
2. Protocols and Sessions: Choose the desired test and
choose the session to display. Current Session is always the
active session. Highlight and select older sessions to be
displayed on the active audiogram for comparison.
3. Buttons: Access various tools and features for Tone
Audiometry, including High Frequency Audiometry,
Multifrequency Audiometry, Automasking, Masking Help and
many others.
4. Talk and Monitor: activate/deactivate the Talk Forward and
Monitor during testing.
5. Counseling Overlays: Activate/deactivate useful tools when
counseling patients about hearing loss.
6. Test symbols: Choose from the available symbols to display
on the audiogram, now also including the tinnitus symbol.
7. Comments/Report Editor: Use this feature to add comments
relevant to the session.
8. Click on to collapse/minimize the Tools and Function task
bar.
9. Right Click on the menus (except on protocol and sessions)
to show/hide the various tools and function.
For a more detailed description of how to use the AUD440 module, please refer to the following
documents:
- Instructions for Use for Affinity
2
/Equinox
2
.
- Instructions for Use for Callisto™.
- Additional Information for Affinity
2
/Equinox
2
.
- Additional Information for Callisto™.
To Next Page
Loading...
Need help?
General
