1. Press the Reset button on the PlayStation system.
2. Highlight and select the Select Cheat Codes option.
3. Now select a game or create a New Game and enter the code description as you
normally would. (Read the Adding New Games and Adding New Codes sections
of this manual)
4. When you are ready to add a new code to the box filled with dots, a menu will
appear with the contents of the Active Codes list. To access the Active Codes list,
press the R2 button on your controller. Use the D-Pad to highlight the code that
you would like to copy, then press the X button.
NOTE: You can use this same procedure to copy active codes that you find using an
Unknown Value Search.
TIPS FOR PERFORMING A KNOWN VALUE SEARCH
1. If at any time you feel that you have made an error, select the Reset Code
Generator option and start over.
2. If the number of possibilities is less than 10, you may want select the View Search
Results option, unless you can get to a lower number of possibilities. This will
display all of the current memory addresses that have your desired value.
UNKNOWN VALUE SEARCH
An unknown search is performed when the variable you are looking for has no known
numeric values. This search is perfect for health meters or air supply meters. To start an
unknown search, highlight the Unknown Value Search option in the Code Generator
menu and press the X button.
The Unknown Value Search menu will appear and contain these 4 commands:
Option 1: Return To Game
This will return you to the game.
Option 2: Exit To Main Menu
This takes you back to the In-Game Menu.
Option 3: Reset Code Generator
This will clear the Code Generator of all other searches previously performed. Use this
option when you are re-starting a search.
Option 4: Start
To Next Page
Loading...