Option 2: Exit and Save
This will save your new code to the specific game listed at the top of this menu and then
exit you to the Select Cheat Codes menu. From there you can enter more enhancement
codes for your game by selecting New Code or activate your new code, IF the code isn't
always on by default.
Option 3: Exit and Discard
This will delete the code that you just entered and then exit you to the Select Cheat Codes
menu. From there, you can enter more enhancement codes for your game by selecting
New Code.
Once you have entered and saved you new codes, you can start to use them. If you chose
Option 2, your new codes will be saved to the built-in list of games within the
GameShark Pro and will remain there until you decide to delete them. Remember to
activate your codes before you start the game if their default is OFF. All activated codes
are highlighted in Yellow.
You can add additional codes to any game simply by selecting the game, highlighting the
New Code line and pressing the X button then follow the entry steps above.
NOTE: Each code is usually only one line, and each code should have 1 description.
Do not make the mistake of entering all of a title's GameShark Pro codes into one
description. Make a description for each code you add.
DELETING A CODE
If you want to delete a code, simply highlight the description of the code and press the
Triangle button. A message will appear asking if you are sure you want to delete the
code. Use the D-pad to highlight Delete and press the X button.
To cancel, simply highlight cancel and press the X button.
SAVING GAMESHARK CODES TO A MEMORY CARD
This feature allows you to save a set of GameShark Pro codes to any PlayStation
compatible memory card. You can either give the card to a friend, so that they can load
the codes into their GameShark Pro or you can use InterAct's DexDrive and e-mail or
post the codes to the Internet. To save a set of codes onto a memory card:
1. Insert a memory card into Memory Card slot #1.
2. Highlight Select Cheat Codes from the Main Menu. Press the X button.
3. In the Select Game menu, highlight the game who's codes you wish to save.
To Next Page
Loading...