4. Press the Select button on your controller to display the Options menu.
5. Highlight Save Codes To Memory Card and press the X button. All codes for the
selected game will be saved to the memory card in Memory Card slot #1.
6. You can store only one set of codes on a memory card at a time. For example, if
you saved Gran Turismo codes to a memory card and then saved Mortal Kombat
Trilogy codes to the same memory card, your Gran Turismo codes will be
ERASED and REPLACED with the Mortal Kombat Trilogy codes.
NOTE: GameShark Pro code saves are always have a solid Blue save icon and are
labeled "CODES" followed by the name of the game
LOADING A SET OF CODES FROM A MEMORY CARD:
This feature allows you to load codes from a memory card to your GameShark Pro so that
you don't have to manually enter the codes. Even if the game's title does not exist in the
GameShark Pro's built-in list of games, this feature will automatically add the game, plus
the codes, to your GameShark Pro. To load a set of codes from your memory card to your
GameShark Pro:
1. Insert the memory card that contains the GameShark codes into Memory Card slot
#1.
2. Highlight Select Cheat Codes from the Main Menu. Press the X button.
3. In the Select Game menu, press the Select button to display the Options menu.
4. Highlight Load Codes From Memory Card then press the X button.
5. The Save/Load screen will appear. If the codes are on the memory card in slot #1,
a message will tell you that the codes were found.
6. Highlight Add Codes and press the X button. To cancel this procedure, highlight
cancel and press the X button.
7. If you selected Add Codes, the codes on your memory card will be added to your
GameShark Pro.
NOTE: You can only load PlayStation game codes into a PSX GameShark Pro. You
cannot load codes into a GameShark with a version number lower than 3.0.
V-MEM™ (Virtual Memory Cards)
To Next Page
Loading...