LAN - Local Area Network Screen.
The LAN settings screen controls the essential LAN settings for the IP controller. On a simple one-to-one
connection the factory default IP address will be in use (192.168.0.192). You may need to use a cross-over
type network cable (depending on the age of your laptop) and you will need to manually assign your laptop
with an IP address. On a network where a DHCP server is operating, the IP controller will automatically be
assigned an IP address and this will be shown on the LCD screen. Do Not Enable DHCP when you are using a
cross over cable directly into a laptop or PC. Do Not Enable DHCP when you are using a stand-alone network
without DHCP Server.
To Next Page
Loading...