Using the Laser Pointer
Press the button on the top
of the ring to activate the laser
pointer. The laser pointer can be
used to highlight important points
on slides and graphs.
Because the laser emits a green
beam it will appear much brighter
than a standard laser beam.
Custom Programming
The buttons on the VP4450 can
be programmed to send a wide
variety of keystrokes to meet
your own needs. The software is
available online at
http://www.smklink.com/support/
downloads.html
From the program select the
desired keys and click “Program
Receiver.” Once programmed,
these changes are written to non-
volatile memory on the receiver.
Because the keys are stored on the
receiver, any machine you plug it
into will send these keys without
any need for software.
To Next Page
Loading...