EasyManuals Logo

Interlogix NX-182xx NetworX User Manual

Interlogix NX-182xx NetworX
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Reference Guide
Main Menu
Speaker
System
Away Arm
System
Disarm
Status Bar
System
Stay Arm
Chime
ON / Off
Help Menu Emergency
Overview.
The NX-182xx is an intuitive graphical touch
screen interface for users of the NetworX
security system. Offering simple fingertip control,
to understand graphic icons.
Away Arming the security system.
Whilst the status bar is displaying the message
“Partition Ready” tap the “Away Icon”; this will arm
the security system fully. The system will not arm
if the status bar is displaying “Not Ready”; all
sensors must be closed.
Disarming the security system.
To disarm the security system, tap the “Off icon”,
a pin pad will display, enter a valid pin code.
Chime mode.
Chime allows sensors to sound a “beep” at the
NX-182xx whenever they are tripped. Chime is
only available whilst the security system is in the
disarmed state.
Tap the “Chime Icon” to toggle chime mode on/off.
**This feature needs to be enabled by your
security provider**
SOS (Emergency keys)
Only press these keys in a situation that requires
a response by emergency personnel. Your system
may not be programmed for these activation
keys, so check with your security provider. If your
system is programmed for these functions, the
following reports can be sent.
**This feature needs to be enabled by your
security provider**
Stay Arming the security system.
Whilst the status bar is displaying the message
“Partition Ready” tap the “Stay Icon”; this will
partially arm the security system. Predetermined
sensors will be isolated, and all remaining
sensors will be active.
via its clear 3.5” touch screen with easy to
Touchscreen Keypad
NX-182xx NetworX
Partition is ready to arm
Partition Ready
Partition is ready to arm
Partition Ready
Partition is ready to arm
Partition Ready
Partition is ready to arm
Partition Ready
Partition is ready to arm
Partition Ready
Partition is ready to arm
Partition Ready
P/N 230245 • REV C • ISS 02JUL14
configured.
Fire Key – When touched for two seconds,
steady alarm sound. If your system is connected
Medical Key – When touched for two
seconds, this key will sound the NX-182xx’s
sounder. If your system is connected to a
monitoring centre, a medical report could be sent.
Police (Panic) Key – When touched for two
seconds, this key will sound the audible panic
alarm, with a yelping alarm sound. If your system
is connected to a monitoring centre, a panic
report could be sent.
Some Panic alarms are programmed to be
silent at the protected site while reporting an
alarm to the monitoring centre; check with your
security provider on how your system has been
To acknowledge / cancel an alarm, tap the Off
icon and enter your user pin code.
this key will sound the audible fire alarm, with a
to a monitoring centre, a fire report could be sent.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Interlogix NX-182xx NetworX and is the answer not in the manual?

Interlogix NX-182xx NetworX Specifications

General IconGeneral
BrandInterlogix
ModelNX-182xx NetworX
CategoryKeypad
LanguageEnglish

Related product manuals