Intermec CK3 Instructions

You can use the vehicle dock mounting kit to install a vehicle dock on your vehicle.
This kit includes:
• One RAM
TM
mount
• Four #8 screws
• Four #10 screws
• Four Nylok nuts
• One optional offset plate
To install the mounting kit
1 If you need additional cable clearance between the vehicle dock and the RAM
mount, use four #8 screws to attach the offset plate to the vehicle dock.
2 If you attached the offset plate in Step 1, use four #10 screws and the Nylok nuts
to attach the RAM mount to the offset plate.
If you are not using the offset plate, use four #8 screws to attach the RAM
mount directly to the vehicle dock.
3 Attach the RAM mount base to a solid surface on your vehicle.
The CK3 vehicle dock is shown as an example.
Vehicle Dock Mounting Kit Instructions
#8 screw
(4 places)
Nylok nut
(4 places)
#10 screw
(4 places)
Oset plate
Vehicle dock
RAM mount

Intermec CK3 Specifications

General

RAM capacity	128 MB
Certification	GS, EN55022 Class B, ICES-003 Class B, EN 300.328, FCC Part 15.247, RSS-210, EMC, FCC Part 15, R&TTE, RoHS, WEEE, cULus
Product color	Gray
Internal memory	512 MB
Built-in display	Yes
Housing material	-
Display resolution	240 x 320 pixels
Display technology	TFT
Processor frequency	520 MHz
Bluetooth version	2.0+EDR
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Operating system installed	Windows Mobile 6
Type	Handheld bar code reader
Scanner type	1D/2D
Power source type	Battery
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	36 mm
Width	84 mm
Height	217 mm
Weight	453 g