To Next PageTo Next Page
Need help?Do you have a question about the Interphase Matrix and is the answer not in the manual?
General| Brand | Interphase |
|---|---|
| Model | Matrix |
| Category | Sonar |
| Language | English |
Highlights DANGER and IMPORTANT notices for safe operation and potential hazards.
Provides details about the product's warranty coverage and terms.
Guidelines for selecting a mounting location for the Matrix display unit.
Instructions for connecting the unit to a 12 VDC battery for power.
Shows the correct pin-out wiring for transducer, speed, and temperature connectors.
Step-by-step guide for installing a transom mount transducer.
Instructions for installing a thru-hull transducer, including fairing block use.
Covers the power/backlight key, keyboard operation, and the initial opening menu.
Configures units, activates demo, adjusts contrast, and starts operation.
Details gain control adjustment and the main scan mode for data display.
Covers beam control options and depth range selection within scan mode.
Explains softkey navigation, alarm settings, and how to exit scan mode.
Details zoom, bottom lock, and fish alarm features within chart mode.
Covers log reset, large digits display, and speed/temperature history graphs.
Adjusting bottom hardness indicator and turning the depth grid on/off.
Displays navigational data alongside bottom history.
Covers plot activation, scroll speed, marking points, and centering the view.
Instructions on how to exit the chart mode and return to the main menu.
Details plot mode, track plotting, and NMEA 0183 interface for navigation data.
Covers resetting the track plot and displaying Lat/Lon coordinates.
Explains cone angle, noise, artifacts, and flat/tilted bottom indications.
Identifies and addresses common sources of interference affecting the unit's display.
