Jump Starter Pack Device Operation Instructions
ACR/QA 1829Nov
Section-B) Jump Starter Pack Device Use Continued:
Step #2) Connect the jump starter devices Smart Clamps to the (EC5) port; located on the end of the unit.
Step #3) Typically, the vehicles battery is located in the engine compartment. For some vehicle manufacture’s
with jump starter battery post/port under-hood, have batteries that are located in the boot/trunk,
under the seat, or in the front fender wheel-well areas of the vehicle. Verify with the manufactures
specifications for the vehicles location for proper jump-starting.
To Next Page
Loading...