INTERTECHNO ITL-2000 User Manual

Erasing all codes:
Press and hold the learn button (L) for around 6 seconds until the LED
begins to flash.
Briefly release the button and then press the learn button (L) again.
The LED will flash 2x as confirmation of the delete process.
No transmitters are required for this process.
To view the Declaration of Conformity, please visit
www.intertechno.at/CE
GB
Operating instructions
ITL-2000

INTERTECHNO ITL-2000 Specifications

General

Brand	INTERTECHNO
Model	ITL-2000
Category	Switch
Language	English