Disabling individual timer settings (e.g. switch off at weekend))
Hold the “TIMER” button for three seconds. Select the desired save location
using the „▼▲“ buttons.
Short press the „II / DEL“ button and confirm using the “ENTER” button. This
process disables the selected timer setting. The display shows a frame around
the number of the save location.
Short press the “TIMER” button to exit.
Activating the save location
The same process used to disable settings. The border around the save location
number will disappear.
Deleting timer settings
Press the “TIMER” button for three seconds. Select the desired save location
using the „▼▲“ buttons.
• Press the “II / DEL” button for three seconds to delete the selected save
location.
• Press “ENTER” to confirm the deletion of the save location. This space will
then be free.
• Short pressing the “TIMER” button will switch back to standby mode.
Child lock (to prevent accidental changes to timer settings)
Activate: Press “ENTER” and “II / DEL” simultaneously for three seconds. “CP”
will briefly appear.
Disable: Press the ”ENTER” and “II / DEL” buttons simultaneously again for
three seconds.
Battery
If the range decreases or the battery symbol appears in the display, replace
the 3V CR2032 battery (Fig.3).
Declaration of conformity available at www.intertechno.at/CE
Operating instructions
GB
ITZ-505
To Next Page
Loading...