Need help?Do you have a question about the Intertek Heat Pure 1500 and is the answer not in the manual?
General advice to read all safety instructions before operating the unit.
Warning against opening or attempting to repair the heater yourself.
Keep flammable items at least 3 ft from the heater and away from sides, top, and rear.
Do not operate a heater with a damaged cord or after malfunctions.
Not for bathrooms/laundry areas; avoid locations where it may fall into water.
Do not touch the control panel or plug with wet hands.
Do not insert foreign objects into ventilation openings to prevent shock or fire.
Do not block air intakes or exhaust, or use on soft surfaces like beds.
Do not use near gasoline, paint, or flammable liquids; keep away from heated surfaces.
Use a minimum 16 AWG cord if an extension cord is necessary.
Plug directly into a 115 V AC electrical outlet to avoid fire or shock.
Turn controls off, then remove the plug firmly from the outlet.
Always unplug the unit before moving, cleaning, or when not in use.
Do not use with any solid-state speed control device to reduce fire/shock risk.
Do not attempt to repair; unit contains no user-serviceable parts.
Connect to properly grounded outlets only.
Automatic shut-off when the heater is tipped over.
Information on proper grounding methods and warnings.
Steps to check if the heater is not operating.
General| Brand | Intertek |
|---|---|
| Model | Heat Pure 1500 |
| Category | Electric Heater |
| Language | English |
To Next Page